Products
 

Posi-Flo

Facet® Posi-Flo® Fuel Pumps

Fuel Compatibility: All models of the Facet Posi-Flo Fuel Pumps are compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additives.

Solid State Reliability: Proven on thousands of original equipment applications. No electrical contacts. No bearings or diaphragms to wear out or fatigue. Lasts four to five times longer than many other electric fuel pumps.

Easy to Install: Two-bolt installation plus the small size makes installation easy. For best results, mount the pump close to the fluid or fuel tank and below the liquid level.

Eliminates Vapor Lock: When properly installed on most vehicles a constant, smooth, dependable supply of fuel under pressure is assured in the hottest weather or in high altitudes.

Available Features:

• 12 inches minimum dry lift
• 23 - 40 GPH
• 1.5 - 10 PSI
• Composite case housing

• Sealed Electronics
• Reverse Polarity protection
• ELV compliant
• State-of-the-Art Electronics
• 1.6 amp average
• Self Priming and Self Regulating
• 18 ounces and 3 inches
• Corrosion Resistant
• Internal 3.5 amp fuse

•Operating Temperature Range:-40F to 180F


12 VOLT FACET® POSI-FLO® FUEL PUMPS

PART #
MAX-MIN
GPH
POSITIVE
NEGATIVE
INLE/OUTLET
MIN. DRY
CHECK
POSITIVE
 
       PSI
 
LEADCONNECTOR
LEAD CONNECTOR
THREAD SIZE
LIFT (")
VALVE
SHUT-OFF
 
          
60104
4.0 - 1.5
23
N/A
RING
1/8-27 INT
12
N
N
 
60106
7.0 - 4.0
32
N/A
RING
1/8-27 INT
12
N
N
 
60107
10. - 7.0
40
N/A
RING
1/8-27 INT
12
N
N
 


 
© 2008 Motor Components, LLC.  All Rights Reserved

Motor Components • Elmira Heights • 607-737-8011