Products
 

Dura-Lift

Facet® Dura-Lift® Fuel Pumps

Application: Refrigeration trucks, marine generator sets, diesel filtration systems, industrial applications, and other diesel lift applications. These pumps are rated for diesel fuel, gasoline, blended alcohol fuels, and fuel additives.

Solid State Reliability: Proven on many original equipment applications No electrical contacts. No bearings or diaphragms to wear out or fatigue. Endurance life almost doubles that of our nearest competitor.

Easy to Install-Easy to Service: Two bolt mounting makes installations easy. Nothing to adjust. The pump is self-priming to 120 inches (3.0 m). Vertical mounting is preferred to assure maintenance of rated pressures. The transparent housing allows for visual capability to monitor the cleanliness of the stainless steel filter.

Eliminates Vapor Lock: When properly installed on most vehicles a constant, smooth, dependable supply of fuel under pressure is assured in the hottest weather or in high altitudes.

Available Features:

  • • Self-priming with a 10 ft. minimum lift
    • Check valve
    • 4 hour dry run
    • Self-regulating
    • 30 GPH
    • 11.5 - 9 PSI

    • VCA approved EC 95/54
  • • 80 Micron Stainless Steel Filter
    • Transient Protection
    • State-of-the-Art Electronic
    • Sealed Electronics
    • Reverse Polarity Protection
    • Corrosion Resistant over 100 hours salt spray
    • Durable Transparent fuel bowl
    • Light Weight - 3LBs at 7 1/4”
  • • Low Power Requirements 1.4 amp on average
  • • Operating Temperature Range: -40F to 180F


12 & 24 VOLT FACET® DURA-LIFT® FUEL PUMP LISTING

PART #
MAX-MIN
GPH
VOLT
ELECTRICAL
INLET/OUTLET
MIN. DRY
CHECK
POSITIVE
         PSI                        CONNECTOR
THREAD SIZE
      LIFT (")
VALVE
SHUT-OFF
         
40222
11.5-9.0
33
12
N/A
1/8-27 INT
120
Y
N
40223
11.5-9.0
33
12
PACKARD
1/8-27 INT
120
Y
N
40237
11.5-9.0
33
24
N/A
1/8-27 INT
120
Y
N


 
© 2008 Motor Components, LLC.  All Rights Reserved

Motor Components • Elmira Heights • 607-737-8011